M Technology Innovation
The following products are also available.
Battery Powered Portable PA with Wireless Receiver
& Wireless Microphone
& Wireless Microphone
Features:
Compact design sets up in just seconds
Rugged lightweight cabinet
MP3 compatible CD player
Inbuilt carry handle
High performance 50W RMS amplifier
Built in backup battery
Optional radio microphone receivers (794-806MHz)
Suitable for desk or speaker stand mounting
Optional wireless link for cable free transmission to additional systems
Optional karaoke echo module
Provision for 8 ohm extension speaker
RCA line input/output
6.35mm / XLR combination wired microphone input.
240VAC mains or battery operation
Compact design sets up in just seconds
Rugged lightweight cabinet
MP3 compatible CD player
Inbuilt carry handle
High performance 50W RMS amplifier
Built in backup battery
Optional radio microphone receivers (794-806MHz)
Suitable for desk or speaker stand mounting
Optional wireless link for cable free transmission to additional systems
Optional karaoke echo module
Provision for 8 ohm extension speaker
RCA line input/output
6.35mm / XLR combination wired microphone input.
240VAC mains or battery operation
Laney CX15A Powered Speaker
The CX15-A is a 2-way speaker design, with built in 300 watt power amp, and
flexible 3 channel mixer front end. These durable injection moulded cabinets are
lightweight yet rugged enough for all live music and speech applications.
Features:
Power RMS 300 Watts
Inputs 1x Jack/CD & 1x Mic XLR
Equalisation Bass, Middle, Treble
Line Out 1x Jack
Line In 1x Jack
Speaker connections 1x Jack (8 ohm minimum)
Impedance 8 Ohm
Drivers 1x 15" Custom Driver + Compression Driver
Cabinet Design Moulded polycarbonate, with flying points and pole mount fittings
CD Input Yes (Phono)
Kick Proof Metal Grill Yes
Frequency Response 50Hz - 18KHz
Sensitivity 95 dB/W@1M
Weight 20.2 Kg
Dimensions (mm) 500 x 360 x 700
Channel Controls EQ, Gain
flexible 3 channel mixer front end. These durable injection moulded cabinets are
lightweight yet rugged enough for all live music and speech applications.
Features:
Power RMS 300 Watts
Inputs 1x Jack/CD & 1x Mic XLR
Equalisation Bass, Middle, Treble
Line Out 1x Jack
Line In 1x Jack
Speaker connections 1x Jack (8 ohm minimum)
Impedance 8 Ohm
Drivers 1x 15" Custom Driver + Compression Driver
Cabinet Design Moulded polycarbonate, with flying points and pole mount fittings
CD Input Yes (Phono)
Kick Proof Metal Grill Yes
Frequency Response 50Hz - 18KHz
Sensitivity 95 dB/W@1M
Weight 20.2 Kg
Dimensions (mm) 500 x 360 x 700
Channel Controls EQ, Gain
The CX15 are Laneys high-end, moulded polypropylene PA cabinets. These units
are rugged yet lightweight, and featuring a power handling figure of 500 watts, and
250 watts RMS, these units are more than loud enough for your gig. All of the new
CX range are a 2-way speaker design.
Features:
Power RMS 250 Watts
Inputs 1x Jack & 1x Speakon
Speaker connections 1x Jack (Link Output) & 1x Speakon (Link Output)
Impedance 8 Ohm
Drivers 1x 15" Custom Driver + Compression Driver
Cabinet Design Moulded polycarbonate, with flying points and pole mount fittings
Kick Proof Metal Grill Yes
Power Handling Program 500 Watts
Frequency Response 50Hz - 18KHz
Sensitivity 95 dB/W@1M
Weight 20 Kg
Dimensions (mm) 500 x 360 x 700
are rugged yet lightweight, and featuring a power handling figure of 500 watts, and
250 watts RMS, these units are more than loud enough for your gig. All of the new
CX range are a 2-way speaker design.
Features:
Power RMS 250 Watts
Inputs 1x Jack & 1x Speakon
Speaker connections 1x Jack (Link Output) & 1x Speakon (Link Output)
Impedance 8 Ohm
Drivers 1x 15" Custom Driver + Compression Driver
Cabinet Design Moulded polycarbonate, with flying points and pole mount fittings
Kick Proof Metal Grill Yes
Power Handling Program 500 Watts
Frequency Response 50Hz - 18KHz
Sensitivity 95 dB/W@1M
Weight 20 Kg
Dimensions (mm) 500 x 360 x 700
Laney CX15 Speaker
The PR15P packs power and full-range sound quality into one compact
loudspeaker. This 2-way powered system contains 270 watts of bi-amped power. A
separate amplifier for each speaker provides crystal clear sound even at very
high levels. 200 watts powers the heavy-duty 15 inch woofer and 70 watts is
dedicated to the RX(R) 14 compression driver. Both amplifiers feature DDT(TM)
compression, which virtually eliminates audible power amplifier clipping. The
enclosure utilizes tough polypropylene in an injection-molded plastic trapezoidal
form, with a coated steel grille to offer an eye-pleasing yet durable powered
speaker system. The PR15P has a built-in three-channel mixer with individual level
controls for XLR or 1/4 inch connections. Molded-in handles provide ease of
transport while multiple mounting points for pole stand and Peavey
Versamount(TM) brackets make it perfect for installs. The Peavey PR15P has a
variety of applications such as sound reinforcement, public address, side fill
system, karaoke, or musical playback. It also makes an excellent stage monitor
and can be easily added to an existing sound system. Now with light weight
Neodymium woofer.
Features:
Bi-amplified powered system with 270 watts maximum output
Both power amps have DDT(TM) compression
15" woofer with 2.375" VC with lightweight neodymium magnet
RX(TM)14 1.4 inch titanium compression driver
Peak SPL up to 120 dB with music
Combo jack with 1/4 inch TRS and Female XLR mic or line-level balanced input
Two 1/4 inch phone jack inputs with concentric level controls
Input mixing built-in
Molded-in horn has exceptionally smooth response and pattern control
Top and sides handgrips
Pole mount molded-in
Top and bottom flying point insert
Now with light weight Neodymium woofer.
Weight: 41.2 Width: 21.25 Depth: 17.25 Height: 28.5
loudspeaker. This 2-way powered system contains 270 watts of bi-amped power. A
separate amplifier for each speaker provides crystal clear sound even at very
high levels. 200 watts powers the heavy-duty 15 inch woofer and 70 watts is
dedicated to the RX(R) 14 compression driver. Both amplifiers feature DDT(TM)
compression, which virtually eliminates audible power amplifier clipping. The
enclosure utilizes tough polypropylene in an injection-molded plastic trapezoidal
form, with a coated steel grille to offer an eye-pleasing yet durable powered
speaker system. The PR15P has a built-in three-channel mixer with individual level
controls for XLR or 1/4 inch connections. Molded-in handles provide ease of
transport while multiple mounting points for pole stand and Peavey
Versamount(TM) brackets make it perfect for installs. The Peavey PR15P has a
variety of applications such as sound reinforcement, public address, side fill
system, karaoke, or musical playback. It also makes an excellent stage monitor
and can be easily added to an existing sound system. Now with light weight
Neodymium woofer.
Features:
Bi-amplified powered system with 270 watts maximum output
Both power amps have DDT(TM) compression
15" woofer with 2.375" VC with lightweight neodymium magnet
RX(TM)14 1.4 inch titanium compression driver
Peak SPL up to 120 dB with music
Combo jack with 1/4 inch TRS and Female XLR mic or line-level balanced input
Two 1/4 inch phone jack inputs with concentric level controls
Input mixing built-in
Molded-in horn has exceptionally smooth response and pattern control
Top and sides handgrips
Pole mount molded-in
Top and bottom flying point insert
Now with light weight Neodymium woofer.
Weight: 41.2 Width: 21.25 Depth: 17.25 Height: 28.5
Peavey PR15P Powered Speaker
Peavey PR10P Powered Speaker
The PR10P is small and lightweight enough to put just about
anywhere yet powerful enough to take on a crowd. This powered
speaker has 270 watts of bi-amped power with 200 watts feeding the
premium 10 inch woofer and 70 watts powering the 1.4 inch driver for
highs. Both amplifiers feature DDT(TM) compression, which virtually
eliminates audible power amplifier clipping. The 3-channel built-in
mixer makes the PR10P perfect for use as small PA and will deliver
plenty of sound even outdoors. Made of high-impact polypropylene,
the molded handles and built-in stand mounts make moving or
installing a breeze. Try the PR10P out and you'll be amazed with its
sound. Now with light weight Neodymium woofer.
Features:
Bi-amplified powered system with 270 watts maximum output
Both power amps have DDT(TM) compression
10" woofer with 2.375" VC and lightweight neodymium magnet
RX(TM)14 1.4 inch titanium compression driver
Peak SPL up to 119 dB with music
Combo jack with 1/4 inch TRS and Female XLR mic or line-level
balanced input
Two 1/4 inch phone jack inputs with concentric level controls
Input mixing built-in
Molded-in horn has exceptionally smooth response and pattern
control
Top handgrip and pole mount molded-in
Top and bottom flying point inserts
Weight: 29.5 Width: 14 Depth: 13.375 Height:19
anywhere yet powerful enough to take on a crowd. This powered
speaker has 270 watts of bi-amped power with 200 watts feeding the
premium 10 inch woofer and 70 watts powering the 1.4 inch driver for
highs. Both amplifiers feature DDT(TM) compression, which virtually
eliminates audible power amplifier clipping. The 3-channel built-in
mixer makes the PR10P perfect for use as small PA and will deliver
plenty of sound even outdoors. Made of high-impact polypropylene,
the molded handles and built-in stand mounts make moving or
installing a breeze. Try the PR10P out and you'll be amazed with its
sound. Now with light weight Neodymium woofer.
Features:
Bi-amplified powered system with 270 watts maximum output
Both power amps have DDT(TM) compression
10" woofer with 2.375" VC and lightweight neodymium magnet
RX(TM)14 1.4 inch titanium compression driver
Peak SPL up to 119 dB with music
Combo jack with 1/4 inch TRS and Female XLR mic or line-level
balanced input
Two 1/4 inch phone jack inputs with concentric level controls
Input mixing built-in
Molded-in horn has exceptionally smooth response and pattern
control
Top handgrip and pole mount molded-in
Top and bottom flying point inserts
Weight: 29.5 Width: 14 Depth: 13.375 Height:19
Peavey PR10 Speaker
The PR series delivers superior sound quality by utilizing
advanced materials, like its lightweight, roadworthy molded
polypropylene exterior. The PR10 is a two-way speaker system
that is lightweight yet rugged for live music or speech
applications and will handle 400 watts program and 800 watts
peak. It utilizes a heavy-duty 10 inch woofer with a 2 inch voice
coil and a RX14(TM) 1.4 inch titanium diaphragm compression
driver coupled to a constant directivity horn. Its durable injection
molded enclosure features a black powder-coated steel grille
that provides driver protection and a professional appearance.
This system can be used on the floor, be pole mounted or flown
via top and bottom flying inserts. Connections are made via two
1/4 inch phone jack connected in parallel to accommodate
daisy-chaining. Now with light weight Neodymium woofer.
Features:
Two-way sound reinforcement enclosure
400 Watts program, 800 watts peak
Frequency Range: 54 Hz to 21 kHz
One 10" woofer with 2.375" VC and lightweight neodymium
magnet
RX14(TM) compression driver with 1.4 inch titanium diaphragm 1
inch exit
90 x 40 constant directivity horn
Tweeter protection
Heavy-duty crossover
Lightweight molded polypropylene enclosure
Molded-in pole mount system
Heavy-duty metal grille
Weight: 20 Width: 14 Depth: 13.375 Height: 19
advanced materials, like its lightweight, roadworthy molded
polypropylene exterior. The PR10 is a two-way speaker system
that is lightweight yet rugged for live music or speech
applications and will handle 400 watts program and 800 watts
peak. It utilizes a heavy-duty 10 inch woofer with a 2 inch voice
coil and a RX14(TM) 1.4 inch titanium diaphragm compression
driver coupled to a constant directivity horn. Its durable injection
molded enclosure features a black powder-coated steel grille
that provides driver protection and a professional appearance.
This system can be used on the floor, be pole mounted or flown
via top and bottom flying inserts. Connections are made via two
1/4 inch phone jack connected in parallel to accommodate
daisy-chaining. Now with light weight Neodymium woofer.
Features:
Two-way sound reinforcement enclosure
400 Watts program, 800 watts peak
Frequency Range: 54 Hz to 21 kHz
One 10" woofer with 2.375" VC and lightweight neodymium
magnet
RX14(TM) compression driver with 1.4 inch titanium diaphragm 1
inch exit
90 x 40 constant directivity horn
Tweeter protection
Heavy-duty crossover
Lightweight molded polypropylene enclosure
Molded-in pole mount system
Heavy-duty metal grille
Weight: 20 Width: 14 Depth: 13.375 Height: 19
3 Channel Microphone Mixer
Dynamic Unidirectional Professional
Microphone
Microphone
Low Cost Dynamic Microphone
Wireless Microphone with
Diversity Receiver
Diversity Receiver
Wireless Microphone UHF Dual
Channel (Diversity)
Channel (Diversity)
XLR Male to 6.5mm Female Adaptor
(XLR to Standard Microphone)
(XLR to Standard Microphone)
| Telescopic Microphone Floor Stand |
| Telescopic Microphone Floor Stand with Boom Arm |
| Microphone Holder (Standard) |
| Heavy Duty Speaker Stand (Small or Large) |
PA System
Comprises of:
* Laney CX15A Powered Speaker
* Heavy Duty Speaker Stand
(Large)
* Wireless Microphone with
Diversity Receiver
* Telescopic Microphone Floor
Stand
* Microphone Holder (Standard)
Comprises of:
* Laney CX15A Powered Speaker
* Heavy Duty Speaker Stand
(Large)
* Wireless Microphone with
Diversity Receiver
* Telescopic Microphone Floor
Stand
* Microphone Holder (Standard)
 |
 |
 |
 |
 |
 |
 |
 |